Ce site requiert JavaScript pour fonctionner.
Veuillez activer JavaScript dans votre navigateur.
Thème Classic
Thème Thottbot
Prot Macro Help needed
Répondre
Retourner à l'index
Publication par
114098
This post was from a user who has deleted their account.
Publication par
484925
This post was from a user who has deleted their account.
Publication par
Porcell
a prot warrior friend gave me this macro he used for tanking.is sorta a one-button mash.
the only problem is i cant seem to get it to work,everytime i use the macro.i'll use shockwave and thunderclap.followed by the last 3lines send out to the last person i talked to.Be it guild/whisper/party.
anyone know whats wrong
/startattack
/castsequence reset=4 shockwave, thunder clap, shield slam,devastate,devastate,thunderclap, shield slam,devastate,devastate,thunderclap, shield slam,devastate
/startattack
/castsequence reset=4 shockwave, thunder clap, shield slam, devastate, devastate, thunderclap, shield slam, devastate, devastate, thunderclap, shield slam, devastate
You need it all on one line. It sounds like you have an errant carriage return after the first line.
That being said, I no way endorse a macro like this.
Publication par
57251
This post was from a user who has deleted their account.
Publication par
Porcell
Wouldn't ... reset=4 ... cause the macro to reset 4 secs after the first keypress, making only the first 3 skills relevant?
I used to think this as well. However, the Reset=4 will ONLY restart the sequence if the Key is not pressed within four seconds. If you never stop pressing the button it will continue to complete the full sequence. The reset=4 just allows the sequence to reset between pulls.
Another problem with this is if you complete the sequence in under 20 seconds, or the sequence resets between pulls, it will freeze on Shockwave until it's off cooldown.
If
I were to use a macro like this, I would take Shockwave out of it.
Publication par
138583
This post was from a user who has deleted their account.
Répondre
Vous n'êtes pas connecté. Veuillez vous
connecter
pour répondre à ce sujet, ou
vous inscrire
si vous n'avez pas déjà un compte.