En bref

Captures d'écran

Vidéos

Commentaires

Commentaire de 746315

Unblockable damage? No problem!

Quick details:
1) Buff does not stack with itself.
2) Will overwrite existing buff if new one is bigger.
3) Scales fairly well with attack power; maybe too well.
4) Recieves minimal benefit from strength, if any. *
5) Minimum absorb of 2.5x stamina.

* See rodalpho's comment for details.

Commentaire de rodalpho

The devs told us exactly how Shield Barrier scales with gear at the link below.

http://us.battle.net/wow/en/forum/topic/5889309137?page=186#3701

I'm pasting it here in case they retire the beta forums after release.

Frenzied Regeneration and Shield Barrier’s formulae have changed to:
Frenzied Regeneration at 60 rage: max(2*(AP-Agi*2), Sta*2.5)
Shield Barrier at 60 rage: max(2*(AP-Str*2), Sta*2.5)
-- Yes, these do mean that it uses your AP without base AP from Str/Agi (but does still slightly include AP from Agi/Str when you’ve got the 10% AP raid buff or other +%AP buffs).

Commentaire de Kaerfemagsh

What's better to use my rage on (what's higher on the priority list): shield block or shield barrier?

Commentaire de faia

A defensive skill that have a icon of a broken shield?

Commentaire de SoooWhoCares

Even though the tooltip states "Absorption amount increases with attack power." it doesn't. I simply used it without and with Cri de guerre and the absorb value was the same. I went on with testing and these are the results:

Doesn't scale with: Strength, AP, mastery, hitpoints.
Does scale with: Stamina.

Absorb amount:
Maximum absorb amount (consuming 60 rage) creates a 2.5*total_stamina strong shield (result rounded down) that absorbs all kind of damage (magic / dots, too).
Using a 20 rage consuming shield will create an absorb effect that is only 1/3 as strong as a 60 rage consuming effect.

So when using a less than 60 rage consuming shield you just get a weaker version of it that uses the same scaling instead of suffering from a scaling that is any kind of worse.

Because the formula means that you'll only get +2.5 additional points of absorb value per point of stamina while each +1 stamina grants +14 HP those additional +14 HP are only covered by 17,857142857% additional absorb value.
That's why this shield is not a good choice in most cases while Maîtrise du blocage will absorb at least 30% of an incoming physical attack and 60% in the event of a critical block (see tank spec mastery).

Commentaire de leto504

In SoO, there are a ton of boss fights that this will outperform Maîtrise du blocage. For anything with multiple adds hitting you, Maîtrise du blocage is the obvious choice. However, here are some examples when Barrière protectrice shines. In all cases, I am referring to a full 60 rage Barrière protectrice. If anyone has any abilities to add to this list, please let me know and I will update it.

Immerseus - Explosion caustique right before the blast. Sbar and some cd's will allow you to take multiple stacks of this spell, effectively allowing you to solo tank it. A Sbar before Tourbillon also helps if you cannot avoid it. When the adds reach the center and explode, you can also absorb it with Sbar.

Fallen Protectors (while tanking Rook) - Frappes vengeresses before he starts. Even though this is physical damage, you cannot block while stunned.

Galakras - Flammes de Galakrond Even after your other tank taunts, keep 60 rage Sbar up until your debuff falls off

Jugg - Both Sblk and Sbar are good on this fight, but I tend to use Sbar much more. Décharges de flammes especially. However, Armure enflammée, Activité sismique, and Impulsion violente can all be absorbed with Sbar.

Dark Shamans - When tanking Haromm, use it for Frappe de tempête-de-givre. When tanking Kadris, Trait tempête-de-givre.

Nazgrim - Most damage is physical, and therefore able to be blocked. The only times I would use Sbar is if, for some reason, you are unable to move away from Onde de choc héroïque. Also, if you help with adds while not tanking Nazgrim, I use it exclusively while tanking Tisse-arc kor’kron

Thok - Souffle d'acide, Souffle givrant, and Souffle de brûlure

Commentaire de Dynamite666

I'm trying to create a weakaura for the symbol with duration and absorb amount.
I can't get the absorb amount displayed.. Has someone maybe a Weakaura for that or an idea where to get a working one?

Liens

Barrière protectrice

Barrière protectrice
Rage : 20

Incantation immédiate	1.5 s de recharge

Vous levez votre bouclier et absorbez [(Max((Puissance d'attaque - 2 * Force) * 180 / 100, Endurance * 250 / 100) * 1) / 3] points de dégâts pendant les prochaines 6 s.

Consomme un maximum de 60 points de rage pour augmenter le montant absorbé. Le montant absorbé augmente avec la puissance d’attaque.

Buff

Détails sur le sort

Durée

6 secondes

École

Physique

Mécanique

n/d

Type de dissipation

n/d

Catégorie GCD

n/d

Coût

Rage : 20

Portée

0 mètres (Soi-même)

Incantation

Instantanée

Recharge

1.5 secondes

GCD

0 secondes

Effet #1

Apply Aura: [Absorb Damage] (Arcane, Feu, Givre, Nature, Ombre, Physique, Sacré)
Valeur : 250
Multiplicateur JcJ : 1

Effet #2

Dummy
Valeur : 180
Multiplicateur JcJ : 1
Script du côté serveur

Effet #3

Dummy
Valeur : 250
Multiplicateur JcJ : 1
Script du côté serveur

Marqueurs

Est une technique
Ne peut être utilisé en changeforme
Ne pas journaliser le rengainage
Ne génère pas de menace
Pas de prérequis à l'équipement de déclencheur
L'aura pointe vers le client

Barrière protectrice

Buff

Détails sur le sort

Informations connexes

Contribuer