간단 정보

스크린샷

동영상

70552의 댓글

uh...whats the pro's and cons to Goblin Engineering...

Marcford89의 댓글

Starts with Tinkerziz (https://www.wowhead.com/cata/npc=3494) in Ratchet.

chrysolite의 댓글

You can only know one of them either its goblin or its gnomish. U cant have both

106143의 댓글

But what are the differences...how do I know which to take?

AnyKey의 댓글

Okay! i have to be totaly sure!
ive made a gnome, lvled it to 225 in engineering. then took to Steamwheedle Port and reed the book, and it didn't say anything about that i could go to gnome or goblin... Gorelaah says something about unlearn my engineering skill... do i have to do that!? i'm 225...
BTW i'm lvl 20 doas that mean something..?

203965의 댓글

So do you pick this quest up in UC or in Ratchet, I have seen two quests with exactly the same layout except they start in different places... Can some one please clarify?

https://www.wowhead.com/cata/quest=3633 and https://www.wowhead.com/cata/quest=3526

onnut의 댓글

is it posible to respec from gnomish to goblin engineering?

Stabb의 댓글

Did you even read the above comments?:p

If you want to respecc a specialization, you must first

Unlearn engineering
Throw out the membership card
Level up engineering all over again
Go to Tanaris, North of Steamwheedle port, and Read the "Soothsaying for Dummies" book.
Chose your new specialization.

Atleast it was like this when I did it PRE TBC.
Good luck and choose wisely!

293615의 댓글

Ok for the horde, i have lvl 450 engineering and i was looking to get Goblin Engineering,
i found the quest at Ratchet 63 ,36. the quest giver's name is Tinkerwiz,
and lead me to Gadgetzan in Tanaris to Nixx Sprocketspring.

there was also Gnomish Engineering quest there too.

149275의 댓글

When you do the achievement https://www.wowhead.com/cata/achievement=871 you have to be friendly with the bloodsail buccaneers, and to get friendly with them you have to kill guards in booty bay. I am thinking about leveling my engineering but how can i become neutral with gadgetzan and still not be hated with the bloodail buccaners?

wyllo의 댓글

I have not been on WoW much the past two months and just came back on. I tried to pay my dues for Goblin Engineering and neither of the Goblins that I usually would pay are asking for me to do so. I am just going directly to the training window. Has WoW done away with the dues? If so, how do we get the additional plans that generally come with the membership?

369197의 댓글

Okay.. i finaly found the real answer to goblin and gnomish engineering... okay what you do is go to ratchet.. once there from the flight master go north east there will be a green house go in it.. you will see a quest.. you can choose goblin or gnomish then and there... you will recieve a book and then you must bring it to gadetzan... you will talk to nixx sprocketspring... you will complete the quest.. then you accept the next quest.. you will sign a piece of paper and talk to him again... then you do one more quest... you need 20 big iron bombs 20 solid dynamite and 5 explosive sheep.. you will give him this and then you finally learn goblin engineering..(dont drop engineering and sign some book idk bout you but i want to keep my level in engineering)

385150의 댓글

can I re-spec from gnomish to goblin engineering?

460803의 댓글

So, is it possible to switch from goblin engineering to gnome engineering?

777258의 댓글

For those of you who are Bloodsail Admirals, yeah, you're pretty much boned

Thottbot의 댓글

hi you have to go to Rachet and go and see Tinkerwiz the engineering trainer he have both quest for goblin and gnome engineering trainer. then you have to go to Tanaris to trun quest. i how this info is useful.

Allakhazam의 댓글

If your Horde you can get your Gnomish And Goblin Engineering Quests From Tinkerwiz In Ratchet.

Tinkerwiz is one of the goblins near Gazlowe

azurepancake의 댓글

To start the Goblin or Gnome Engineering quest chain for the Horde, go see Tinkerwiz in Ratchet 팅커위즈 (not sure about alliance, probably the same since it's a neutral area)

Drougen의 댓글

If you want to do Gnomish, get the BoP items and switch to goblin read this.

1. Get artisan engineering.
2. Go to Tinkerwiz in Ratchet. He's in the observatory, next to Gazlowe. Get Mithril tubesx6, an accurate scope, and advanced target dummy x2
3. Get the Gnome Engineering quest from him. He may have an exclamation point, he may not, but he should still have the quest.
4. Talk to Oglethorpe Obnoticus in Booty Bay. I can't really explain how to get to him, so run to the very center of BB's "arc" then look for the minimap dot.
5. Complete the quest and the next one he gives you. These are straightforward.
6. Complete "Show Your Work."
7. Learn and make items you want that you can use without Gnomish engineering (Gnomish goggles, Gnomish battle chicken, Gnomish death ray, Gnomish net-o-matic projector, gnomish mind control cap, gnomish harm prevention belt, gnomish rocket boots, and gnomish shrink ray)

Now you have all the Gnomish items, drop it get back to artisan engineering again, this is where things have a lot of miss information, you don't have to do any quests again after this.

Go straight to NE Tanaris (/way 65, 18) in that building there's a book on the table called "Soothsaying for dummies" as of currently in classic that's all you need to do, click it and you can learn goblin or gnomish instantly. It's that easy.

Oceandust의 댓글

To start this quest you must be at least level 30 and have your Engineering skill 200+

Full quest chain if you started in Undercity:

1. 고블린 기계공학
2. 비밀유지서약서
3. 직접 만든 물건

You now have Goblin Engineering (Horde)!

frost3go의 댓글

If you're like me and confused why there is no quest available for you anywhere, you must have completed it before. I did it in classic, then dropped engineering, then picked it up again in WotLK.
If this is the case, just go to a hut above steamwheedle port (Tanaris ~66.20) and there is a book on the table. Click it and pick the goblin or gnomish for free.

링크

고블린 기계공학

이 퀘스트는 더 이상 게임 내에서 받을 수 없습니다.

고블린 기계공학에 대해 더 알고 싶으면 가젯잔에 있는 닉스 스프로켓스프링에게 기계공학 설명서를 가져가야 합니다.

	기계공학 설명서 (제공됨) (1)

서술

고급 기계공학은 두 갈래로 분류된다오. 바로 노움 기계공학과 고블린 기계공학이지. 단연코, 뛰어난 기술자라면 누구나 고블린 기계공학을 선택한다오. 엄청난 화력의 폭발물과 뛰어난 장비를 사용해서 세계를 완전히 장악할 수 있으니 말이오!

이 설명서를 읽어 보시오. 고블린 기계공학을 배우고 싶거든 가젯잔에 있는 닉스 스프로켓스프링에게 이 설명서를 가져가시오. 하지만 명심하시오. 회원 가입은 영구적이고, 일단 가입하면 다른 갈래의 기계공학은 배우지 못한다오. 그러니까 그가 주는 임무를 완료하기 전에 확실히 마음의 결정을 내리도록 하시오!

진행 상황

완료

보상

다음과 같은 것들을 받습니다:

획득

퀘스트 완료 시 보상:

이미 완료했는지 확인하려면 다음과 같이 입력하세요:

/run print(C_QuestLog.IsQuestFlaggedCompleted(3526))

고블린 기계공학

서술

진행 상황

완료

보상

획득

연관된 페이지들

기여